John Deere 225 Offset Disk

John Deere 225 Offset Disk

225 Offset Disk from John Deere. Learn more about the features and more for the 225 Offset Disk.

  • Hitch can be set to meet disking needs
  • Choice of disk blades provided
  • Gang wrenches come as base equipment
  • One-piece welded mainframe
Manufacturer
John Deere
Category
Disks
Location
Anna, Ohio
Franklin, Indiana
Greenfield, Indiana
Greensburg, Indiana
Greenville, Ohio
Oxford, Ohio
Richmond, Indiana
Rushville, Indiana
Urbana, Ohio
Specs
Fold:
TypeRigid
Working widths:
Spacing option AOption 1
18 discs
2.11 m
6.92 ft, in.Option 2
20 discs
2.31 m
7.58 ft, in.Option 3
22 discs
2.54 m
8.33 ft, in.Option 4
24 discs
2.77 m
9.08 ft, in.Option 5
26 discs
3.0 m
9.83 ft, in.Option 6
28 discs
3.2 m
10.5 ft, in.
Disc spacing - 22.86 cm
9 in.
Transport width:
Spacing option A229 mm
9 in.
Operating speed:
Miles per hour6.4 to 9.7 km/h
4 to 6 mph
Power requirements:
Horsepower requiredPower take-off - 29.8 to 74.6 kW
40 to 100 hp
Engine - 35.8 to 89.5 kW
48 to 120 hp
Light drawn - 18 discs 29.8, 20 discs 33.5, 22 discs 37.3, 24 discs 41.0, 26 discs 44.7, and 28 discs 48.5 kW
18 discs 40, 20 discs 45, 22 discs 50, 24 discs 55, 26 discs 60, and 28 discs 65 hp
Medium drawn - 18 discs 41.0, 20 discs 44.7, 22 discs 47.5, 24 discs 52.2, 26 discs 55.9, and 28 discs 59.7
18 discs 55, 20 discs 60, 22 discs 65, 24 discs 70, 26 discs 75, and 28 discs 80
Heavy drawn - 18 discs 52.2, 20 discs 55.9, 22 discs 59.7, 24 discs 63.4, 26 discs 67.1, and 28 discs 74.6
18 discs 70, 20 discs 75, 22 discs 80, 24 discs 85, 26 discs 90, and 28 discs 100
Leveling options:
Option 1Parallel-lift bar and 3-leaf spring for front-to-rear leveling and increased relative pressure on front or rear gangs
Depth control:
Option 1Mechanical depth stops
Hydraulic requirements:
Standard1 selective control valve (SCV) required
Electrical requirements:
Standard9-pin connector for warning lights
Hitch:
TypeCombination hitch with right or left offset options
Frame:
TubingStructural steel - 4x4x3/406 mm
16 in.
Gang:
AngleFront
25 to 48 degree (angle)Rear
25 to 48 degree (angle)
Adjustable
TubingFront
Structural steel - 3x5x3/406 mm
16 in.Rear
Structural steel - 3x5x3/406 mm
16 in.
Gang boltRound - 38 mm
1.5 in.
Gang standardRigid nodular iron
BearingsTriple-sealed ball bearings with wear guards (no lubrication needed unless grease fittings are installed)
ScraperRigid
Finishing blades:
StandardOption 1
Spherical blade with scraper - 356 mm
14 in.
Middle breakerOffset
Blades:
Spacing229 mm
9 in.
SizeOption 1
Solid cone - 559 x 4 mm
22 x 0.157 in.Option 2
Solid cone or cutout cone, or a combination of a front cutout cone and a rear solid cone -
610 x 4.5 mm
24 x 0.177 in.Option 3
Solid spherical or cutout cone - 610 x 4.7 mm
24 x 0.187 in.Option 4
Solid cone or cutout cone - 610 x 6.5 mm
24 x 0.256 in.
Wheels:
Mainframe wheels and tiresOption 1
4PR rib implement base wheel and tire option -
Two 15-5KB wheels with 6.70-15 in. 4PR rib implement tubeless tires (in base price)Option 2
Wheels less tires options -
Two 15-6 wheels less tires
Two 16-6 wheels less tiresOption 3
6PR rib implement tubeless wheel and tire options -
Two 14-6KB wheels with 9.50-14 in. 6PR implement tubeless tires
Two 15-6KB wheels with 7.60-15 in. 6PR implement tubeless tiresOption 4
6PR rib implement tubeless wheel and tire option -
Two wheels with 7.6-15 in. 8PR tires
Wingframe wheels and tiresOption 1
At 152-cm (60-in.) wheel tread spacing, working width -
2.11 to 3.0 m
6.92 to 9.83 ftOption 2
At 203-cm (80-in.) wheel tread spacing, working width -
3.20 to 3.66 m
10.5 to 12.0 ft