2720 Disk Ripper. Nowhere on earth can you find a disk ripper that does all this: Size and manage residue. Penetrate and shatter the compaction layer. Bury and mix residue. And help level the soil profile. All in just one pass.
- Bury residue to 15-in. (38.1 cm) depths
- Improved residue flow in wet conditions
- The most level soil profile from a ripper
- Exclusive hydraulic rolling basket option
Call Us
- Anna, Ohio937-693-2221
- Franklin, Indiana317-738-2250
- Greenfield, Indiana317-462-5585
- Greensburg, Indiana812-663-5992
- Greenville, Ohio937-548-1151
- Oxford, Ohio513-523-4169
- Richmond, Indiana765-962-7330
- Rushville, Indiana765-932-2977
- Urbana, Ohio937-653-5281
Manufacturer
John Deere
Category
Tillage
Location
Anna, Ohio
Franklin, Indiana
Greenfield, Indiana
Greensburg, Indiana
Greenville, Ohio
Oxford, Ohio
Richmond, Indiana
Rushville, Indiana
Urbana, Ohio
Specs
| Key Specs: | |
|---|---|
| Working width | 3.8-8.4 m 12.5-27.5 ft |
| Transport width | With furrow filler attachment: 5.2-5.6 m 16.9-18.4 ft |
| Maximum operating depth | 40.6 cm 16 in. |
| Operating speed | 8-11.3 km/h 5-7 mph |
| Horsepower required per standard | 66-75.6 kW 41-47 hp |
| Standards | Spacing 76.2 cm 30 in. |
| Tool: | |
| Configuration | Disk - Ripper - Disk - Conditioner |
| Option 1 | Rigid 5-standard on spacing of 76.2 cm 30 in. |
| Option 2 | Rigid 7-standard on spacing of 76.2 cm 30 in. |
| Option 3 | Gang-fold rigid 7-standard on spacing of 76.2 cm 30 in. |
| Option 4 | 3-section flex-fold 9-standard on spacing of 76.2 cm 30 in. |
| Option 5 | 3-section flex-fold 11-standard on spacing of 76.2 cm 30 in. |
| Option 6 | |
| Option 7 | |
| Option 8 | |
| Option 9 | |
| Option 10 | |
| Option 11 | |
| Option 12 | |
| Option 13 | |
| Option 14 | |
| Option 15 | |
| Option 16 | |
| Option 17 | |
| Working width: | |
| Option 1 | 3.8 m 12.5 ft |
| Option 2 | 5.3 m 17.5 ft |
| Option 3 | 5.3 m 17.5 ft |
| Option 4 | 6.9 m 22.5 ft |
| Option 5 | 8.4 m 27.5 ft |
| Option 6 | |
| Option 7 | |
| Option 8 | |
| Option 9 | |
| Option 10 | |
| Option 11 | |
| Option 12 | |
| Option 13 | |
| Option 14 | |
| Option 15 | |
| Option 16 | |
| Option 17 | |
| Transport width: | |
| Option 1 | With furrow filler attachment: 5.2 m 16.9 ft |
| Option 2 | With furrow filler attachment: 6.8 m 22.4 ft |
| Option 3 | With furrow filler attachment: 5.5 m 18 ft |
| Option 4 | With furrow filler attachment: 5.6 m 18.4 ft |
| Option 5 | With furrow filler attachment: 5.6 m 18.4 ft |
| Option 6 | |
| Option 7 | |
| Option 8 | |
| Option 9 | |
| Option 10 | |
| Option 11 | |
| Option 12 | |
| Option 13 | |
| Option 14 | |
| Option 15 | |
| Option 16 | |
| Option 17 | |
| Depth: | |
| Maximum operating depth | 40.6 cm 16 in. |
| Transport clearance: | |
| Standard | 25.4 cm 10 in. |
| Underframe clearance: | |
| Maximum | 95.25 cm 37.5 in. |
| Speed: | |
| Operating speed | 8-11.3 km/h 5-7 mph |
| Horsepower: | |
| Horsepower required per standard | 66-75.6 kW 41-47 hp |
| Depth control: | |
| Option 1 | Single-point crank |
| Option 2 | TruSet™ tillage |
| Hydraulics: | |
| Option 1 | 2 SCVs (depth control, optional rolling baskets) at 17,237 kPa 2,500 psi for optimum raise times |
| Option 2 | 3 SCVs (depth control, wingfold, optional rolling baskets) at 17,237 kPa 2,500 psi for optimum raise times |
| Hitch: | |
| Design | Single hitch tube: 15.2x25.4 cm 6x10 in. |
| Fore-aft adjustment | Hitch turnbuckle |
| Standards: | |
| Spacing | 76.2 cm 30 in. |
| Frame cross section | |
| Standards, Option 1: | |
| Trip force | Cushion-trip standard: 1,859.7 kg 4,100 lb |
| Trip height | Shear bolt protected above: 33 cm 13 in. |
| Type | Parabolic with or without wear shins, straight with wear shins |
| Standards, Option 2: | |
| Trip force | |
| Trip height | |
| Type | |
| Standards, Option 3: | |
| Trip force | |
| Trip height | |
| Type | |
| Ground engaging components: | |
| Type | Wingless, LaserRip™ II points: 12.7 cm 5 in. 17.8 cm 7 in. 25.4 cm 10 in. |
| Coverboards | Parabolic cushion-trip standards with wear shins and holes to mount coverboards |
| Wear shin | |
| Mulching disk components: | |
| Description | Disk - Shank - Disk configuration |
| Depth control | TruSet in-cab controls Single-point depth control |
| Maximum depth | 15.2 cm 6 in. |
| Type of standard | C-spring |
| Base equipment blades | Solid spherical low-concavity disk blades: 610x6.5 mm 24x0.256 in. |
| Blade spacing | 27.9 cm 11 in. |
| Front frame angle | Fixed: 18 degree (angle) |
| Rear frame angle | 14-16 degree (angle) |
| Spools | |
| Bearings | Sealed, maintenance-free |
| Scraper | Heavy-duty floating combination scraper (base option) |
| Rear conditioner: | |
| Description | |
| Adjustments | |
| Type of standard | |
| Base equipment blades | |
| Bearings | |
| Tires: | |
| Type | Tandem walk-over wheels options dependent on configuration (4)11L-15 FI D LR tires (4)340/65R18 Goodyear® tires (4)340/65R18 Michelin® tires |
| Wheels: | |
| Type | Walk-Over tandem wheels, 57.2-mm (2.25-in.) diameter plug-in spindles and bolt hubs |
| Rear hitch: | |
| Type | |
| Approximate weight: | |
| Option 1 | |
| Option 2 | |
| Option 3 | |
| Option 4 | |
| Option 5 | |
| Option 6 | |
| Option 7 | |
| Option 8 | |
| Option 9 | |
| Option 10 | |
| Option 11 | |
| Option 12 | |
| Option 13 | |
| Option 14 | |
| Option 15 | |
| Option 16 | |
| Option 17 | |
| Additional Features: | |
| Option 1 | Hydraulically adjustable finishing attachments Knife-edge rolling basket Round-bar rolling basket |
| Option 2 | |
| Option 3 | |
| Option 4 | |
| Option 5 | |
| Additional information: | |
| Date collected |