John Deere 425 Offset Disk

Studio image of 425 Offset Disk

425 Offset Disk from John Deere. Learn more about the features and more for the 425 Offset Disk.

  • Offset Disks provide reliable strength
  • Heavy-duty disk gangs and gang bearings
Manufacturer
John Deere
Category
Tillage
Location
Anna, Ohio
Franklin, Indiana
Greenfield, Indiana
Greensburg, Indiana
Greenville, Ohio
Oxford, Ohio
Richmond, Indiana
Rushville, Indiana
Urbana, Ohio
Specs
Fold:
TypeRigid
Working widths:
Spacing option AOption 1
2.79 m
9.17 ft, in.
Option 2
3.23 m
10.58 ft, in.
Option 3
3.68 m
12.08 ft, in.
Option 4
4.11 m
13.5 ft, in.
Option 5
4.78 m
15.67 ft, in.
229 mm
9 in.
Spacing option BOption 14
2.67 m
8.75 ft, in.
Option 15
3.23 m
10.58 ft, in.
Option 16
3.76 m
12.33 ft, in.
Option 17
4.01 m
13.17 ft, in.
Option 18
4.78 m
15.67 ft, in.
279 mm
11 in.
Transport width:
Spacing option A229 mm
9 in.
Operating speed:
Miles per hour6.4 to 9.7 km/h
4 to 6 mph
Power requirements:
Horsepower required41 to 112 kW
55 to 150 hp
Leveling options:
Option 1Parallel-lift bar and 5-leaf spring for front-to-rear leveling and increased relative pressure on front or rear gangs
Depth control:
Option 1Mechanical depth stops
Hydraulic requirements:
Standard1 selective control valve (SCV) required
Electrical requirements:
Standard9-pin connector for warning lights
Hitch:
TypeCombination hitch with right or left offset options
Frame:
TubingStructural steel - 3x5x3/203 mm
8 in.
Gang:
AngleFront
28 to 48 degree (angle)
Rear
28 to 48 degree (angle)
Adjustable
TubingFront
Structural steel - 4x6x1/102 mm
4 in.
Rear
Structural steel - 4x6x1/102 mm
4 in.
Gang boltRound - 38 mm
1.5 in.
Gang standardRigid nodular iron
BearingsTriple-sealed ball bearings with wear guards (no lubrication needed unless grease fittings are installed)
ScraperRigid
Finishing blades:
StandardOption 1
Spherical blade with scraper: 356 mm
14 in.
Middle breakerOffset
Blades:
Spacing229 or 279 mm
9 or 11 in.
SizeOption 1
Cutout cone front and solid cone rear or Cutout spherical front and solid spherical rear -
610 x 4.5 mm
24 x 0.177 in.
Option 2
Solid cone or Cutout cone front and solid cone rear -
610 x 6.5 mm
24 x 0.256 in.
Option 3
Cutout cone or cutout cone front and solid cone rear or cutout spherical front and solid spherical rear -
660 x 6.5 mm
26 x 0.256 in.
Wheels:
Mainframe wheels and tiresOption 1
Two 15-8 wheels with 11L-15 10PR tires
Option 2
Two 15-8 wheels less tires
Option 3
Two 16-6 wheels less tires
Wingframe wheels and tiresOption 1
Wheel tread spacing - 198 cm
78 in.