John Deere 630 Mower-Conditioner

Studio image of 630 Mower-Conditioner

The 630 Mower-Conditioner delivers a fast, clean cut, field after field, season after season.

  • Urethane roll conditioner available
  • Cutting platform is gear-driven
  • Adjustable gauge shoes
  • Flotation tires
Key Specs:
PTO speed 540 or 1,000 rpm
1000 rpm 1-3/8 in. PTO 48-112 kW
65-150 hp
Powerline type Double-telescoping Grob spline
Standard hitch Clevis
Optional hitch Ball joint equal angle hitch
Hydraulic pressure required 13,790 kPa
2,000 psi
Cutterbar - cutting width 3 m
9.75 ft
Number of disks/knifes 6
12
Transport width 3 m
9.75 ft
Power requirements:
PTO speed 540 or 1,000 rpm
1000 rpm 1-3/8 in. PTO 48-112 kW
65-150 hp
Powerline type Double-telescoping Grob spline
Tractor equipment:
Standard hitch Clevis
Optional hitch Ball joint equal angle hitch
Rockshaft swivel hitch
Hydraulic pressure required 13,790 kPa
2,000 psi
Cutterbar:
Type John Deere
Cutting width 3 m
9.75 ft
Cutting height Without extension: 28 to 98 mm
1.1 to 3.7 in.
Number of disks 6
Number of knives 12
Disk speed 2,650 rpm
Knife tip speed 307 km/h
191 mph
Disk drive Gear
Lubrication Hy-Gard oil
Oil reservoir capacity 7 L
7.4 qt
Cutterbar oil check Drain plug
Cutterbar angle Adjustable
Angle adjustment Mechanical or hydraulic
Cutterbar protection Shear hub
Adjustable gauge shoes Yes
Impeller conditioner:
Width 1,854 mm
73 in.
Diameter 594 mm
23.4 in.
Tines type V-tines
Number of tines 45
Number of speeds Two
Drive 3-V powerband belt and sheaves
Conditioner hood Infinite adjust, single hand crank
Rolls conditioner:
Width 1,854 mm
73 in.
Diameter 254 mm
10 in.
Type of material Urethane
Design Recessed cleat
Speed 664 rpm
Drive Telescoping shaft
Dimensions:
Transport width
3 m
9.75 ft
Transport length
With equal angle tongue: 6.2 m
20.5 ft
Weight, impeller conditioner 2,130 kg
4,696 lb
Standard tires Standard: 11L-15
Optional: 31x13.5L 15
General:
Are wrenches required for adjusting?