730 Air Disk Drill Air Seeding from John Deere. Learn more about the features, specifications, and more for the 730 Air Disk Drill Air Seeding.
- See the flow of seed & fertilizer from the cab with RelativeFlow™ blockage monitoring
- Double-disk openers offer precise depth
- Three tool widths and two seed row spacings
- Field Doc™ and Map-Based Prescriptions
Call Us
- Anna, Ohio937-693-2221
- Franklin, Indiana317-738-2250
- Greenfield, Indiana317-462-5585
- Greensburg, Indiana812-663-5992
- Greenville, Ohio937-548-1151
- Oxford, Ohio513-523-4169
- Richmond, Indiana765-962-7330
- Rushville, Indiana765-932-2977
- Urbana, Ohio937-653-5281
Manufacturer
John Deere
Category
Drills
Location
Anna, Ohio
Franklin, Indiana
Greenfield, Indiana
Greensburg, Indiana
Greenville, Ohio
Oxford, Ohio
Richmond, Indiana
Rushville, Indiana
Urbana, Ohio
Specs
| Key Specs: | |
|---|---|
| Working widths | 28 ft 8.7 m |
| Number of ranks | 4 ranks of c-shanks,1 rank seed openers |
| Number of sections | 3 |
| Opener - Type | Double disk |
| Underframe clearance | 24 in. 60.9 cm |
| Mainframe - Centerframe width | 11-ft. 8-in. 3.56 m |
| Mainframe - Wing flexibility | 11 degrees up, 9 degrees down |
| Harrow - Type | Tine tooth |
| Harrow - Attachment | Rolling Basket with 1-bar harrow |
| Seeding tool depth control - Range | 1/4 inch increments |
| Sizes: | |
| Working widths | 8.53 m 28 ft |
| Number of ranks | 4 ranks of c-shanks,1 rank seed openers |
| Number of sections | 3 |
| Opener: | |
| Type | Double disk |
| Penetration force | Patented Active Hydraulic |
| Boot | aluminum |
| Quantity | 46 on 7.5-in. spacing 56 on 6-in. spacing |
| Size | 13.5-in. (343 mm) with 0.25-in. (6 mm) offset |
| Spacing | 6-in. (15.2 cm) or 7.5-in. (19.1 cm) |
| Down pressure | Opener down pressure: 105 lb./opener Press wheel down pressure: 65 lb. at 1500 psi |
| Mainframe: | |
| Type | 3-section drawn flexible |
| Size | 28 ft 8.7 m |
| Centerframe width | 3.56 m 11-ft. 8-in. |
| Cross tubes | 4x4-in. (102x102 mm) |
| End tubes | 2x5-in. (50x127 mm) |
| Hitch (tubular steel) | 6x10-in. (76x152 mm) |
| Rockshaft | 5.5 x 0.312-in. 140 x 7.92 mm |
| Folding | over-center |
| Wing flexibility | 11 degrees up, 9 degrees down |
| Clearance: | |
| Fore-and-aft | 134 in. 3.51 m |
| Underframe clearance | 24.1 in. 60.9 cm |
| Between ranks range | 29 to 41-in. (73.7 to 104 cm) |
| Hydraulics | active hydraulic downpressure |
| Harrow: | |
| Type | Tine tooth |
| Attachment | Rolling Basket with 1-bar harrow |
| Shanks: | |
| Type | Tru-Position |
| Quantity | 37 |
| Size | 3/4 x 1-3/4 x 24-in. 19 x 44 x 610 mm |
| Spacing | 9 in. 22.8 cm |
| Trip clearance | 10 in. 25.4 cm |
| Trip force | 200 lb 890 N |
| Arc | 47 degree |
| Finishing tool | double bar harrow or rolling basket with single bar harrow |
| Seeding tool depth control: | |
| Type | On individual openers |
| Range | 1/4 inch increments |
| Tires: | |
| Wing; standard | (4) 9.5Lx15 Load Range D walk-over tandems |
| Gauge wheels, wing | 2-7.60x15 8PR |
| Centerframe; standard | (4) 11Lx15 Load Range D walk-over tandems |
| Gauge wheels, centerframe | |
| Castering stabilizer | (2) 7.60x15 8 PR |
| Transport position: | |
| Height | Maximum height: 12-ft. 9.3-in (3.90 m) Minimum height: 11-ft. 4.3-in (3.46 m) |
| Width | 16-ft. 3.6-in. (4.97 m) |
| Transport clearance | With sweep extenders: 16.26-in. (413 mm) Without sweep extenders: 17.26-in. (438 mm) |
| Machine weight: | |
| With seed only | |
| With seed and fertilizer | |
| Tractor hydraulic requirements: | |
| Minimum SCVs | 2 SCVs |
| Warning lights: | |
| Standard | Yes |
| Freight: | |
| Shipping location | Des Moines, IA |
| Additional information: | |
| Date collected |