Performance features of the 735D include taller belt cleats, wider belts, and a larger, 16-inch feed drum. You can even add an optional auxiliary top auger to keep bushy crops moving into the feederhouse.
- Hydrafloat™ allows the operator to match changing field conditions
- Double-cut knife system produces a cleaner cut
- Cutterbar is closer to the ground
- Stainless-steel feed floor
Call Us
- Anna, Ohio937-693-2221
- Franklin, Indiana317-738-2250
- Greenfield, Indiana317-462-5585
- Greensburg, Indiana812-663-5992
- Greenville, Ohio937-548-1151
- Oxford, Ohio513-523-4169
- Richmond, Indiana765-962-7330
- Rushville, Indiana765-932-2977
- Urbana, Ohio937-653-5281
Manufacturer
John Deere
Category
Draper Platforms
Location
Anna, Ohio
Franklin, Indiana
Greenfield, Indiana
Greensburg, Indiana
Greenville, Ohio
Oxford, Ohio
Richmond, Indiana
Rushville, Indiana
Urbana, Ohio
Specs
| Key Specs: | |
|---|---|
| Cutterbar length | 10.67 m 35 ft |
| Knife drive | Base: single (combine use only) Optional: dual knife (combine use only) Base: dual knife (SPW only or SPW/combine combination use) |
| Knife speed | 490 cycles/min |
| Pickup reel operating speeds | 6-54 rpm 137.2-cm (54-in.) reel: 5-44 rpm |
| Draper belts speed control | Hydraulic from cab |
| Platform: | |
| Type | Rigid draper |
| Cutterbar: | |
| Type | Straight-line knife drive system |
| Length | 10.67 m 35 ft |
| Knife drive | Base: single (combine use only) Optional: dual knife (combine use only) Base: dual knife (SPW only or SPW/combine combination use) |
| Knife speed | 490 cycles/min |
| Cutterbar tilt | Base: hydraulic, maximum tilt 9 degree (angle) |
| Base skid shoe height | |
| Pickup reel: | |
| General | |
| Number of slats | Base: six bat poly Optional: eight bat steel (for forage conditions) |
| Fingers | Base: nylon Optional: steel (typically used in rice or forage conditions) |
| Diameter | 1.067 m 3.5 ft For rice or forage conditions: 1.371 m 4.5 ft |
| Height control | Hydraulic |
| Speed control | Hydraulic |
| Reel lift | Cylinder stroke: 330 mm 13 in. Total range: 391.5 mm 15.4 in. |
| Reel fore and aft | Cylinder stroke: 359 mm 14.1 in. Total range: 620 mm 24.4 in. |
| Fore of the cutterbar | |
| Reel resume | Base |
| Reel reverse | Base |
| Operating speeds | 6-54 rpm |
| Operating speeds (54-in. reel) | 5-44 rpm |
| Slat reel: | |
| Number of slats | |
| Diameter | |
| Height control | |
| Speed control | |
| Operating speeds | |
| Draper belts: | |
| Width | Rubber coated polyester with V-Guide tracking: 0.7 L 24 oz Side belts: 1.02 m 3.33 ft Center belts: 1.4 m 4.583 ft Center belt not included with SPW configuration |
| Belt depth | |
| Cleat height | 25.4 mm 1 in. |
| Operating speed | Side belts: variable up to 223 m/min 735 fpm Center belts: 212 m/min 695 fpm Center belt not included with SPW configuration |
| Speed control | Hydraulic from cab |
| Center belt reverse | Base: center belt not included with SPW configuration |
| Feed drum: | |
| Diameter | Two factory-installed options: 356 or 406 mm 14 or 16 in. Feed drum not included with SPW configuration |
| Feed drum fingers | Steel, heavy-duty, and round with breakaway notch and retainer Diameter: 16 mm 0.625 in. |
| Number of fingers | 18 |
| Auger finger platform | Dual chevron, retracting |
| Finger reach | 152 mm 6 in. |
| Drum/auger reverse | Base |
| Operating speed | 195 rpm |
| Center cleanout door | Base |
| Header height sensing: | |
| Type | Base: electrohydraulic |
| Header height sensing on the ground | Base |
| Header height sensing off the ground | Base |
| Top auger: | |
| Type | Optional: hydraulic drive |
| Fingered augers | |
| Size | |
| Dimensions: | |
| Platform length | 11.6 m 37.9 ft |
| Overall operating depth | 2.5 m 8.2 ft |
| Transport width, field position | 11.4 m 37.5 ft |
| Transport width on wheel, less dividers | 2.7 m 8.9 ft |
| Transport length, hitch extended | 13.8 m 45.4 ft |
| Weight: | |
| Approximate weight | |
| Additional information: | |
| Date collected |