John Deere 830 Mower-Conditioner

Studio image of 830 Mower Conditioner

The 830 Mower-Conditioner delivers a fast, clean cut, field after field, season after season.

  • Optional V10 rolls and Wide Swath Kit
  • Modular-design cutterbar
  • Adjustable roll pressure
  • Hydraulic tongue positioning
Manufacturer: 
John Deere
Category: 
Hay and Forage Equipment
Location: 
Anna, Ohio
Franklin, Indiana
Greenfield, Indiana
Greensburg, Indiana
Greenville, Ohio
Oxford, Ohio
Richmond, Indiana
Rushville, Indiana
Urbana, Ohio
Key Specs:
PTO speed 540 or 1,000 rpm
1000 rpm 1-3/8 in. PTO 52-112 kW
70-150 hp
Powerline type Double-telescoping Grob spline (swivel is tube)
Standard hitch Ball joint equal angle hitch
Optional hitch Rockshaft swivel hitch
Hydraulic pressure required 13,790 kPa
2,000 psi
Cutterbar - cutting width 3 m
9.8 ft
Number of disks/knifes 6
12
Transport width 3 m
9.8 ft
Power requirements:
PTO speed 540 or 1,000 rpm
1000 rpm 1-3/8 in. PTO 52-112 kW
70-150 hp
Powerline type Double-telescoping Grob spline (swivel is tube)
Tractor equipment:
Standard hitch Ball joint equal angle hitch
Optional hitch Rockshaft swivel hitch
Hydraulic pressure required 13,790 kPa
2,000 psi
Cutterbar:
Type John Deere
Cutting width 3 m
9.8 ft
Cutting height 2-9.5 cm
0.8-3.7 in.
Number of disks 6
Number of knives 12
Disk speed 2,650 rpm
Knife tip speed 307 km/h
191 mph
Disk drive Gear
Lubrication Hy-Gard oil
Oil reservoir capacity 7 L
7.4 U.S. qt
Cutterbar oil check Combination check, drain plug
Cutterbar angle Adjustable
Angle adjustment Mechanical standard
Cutterbar protection Shearhub
Adjustable gauge shoes Yes
Impeller conditioner:
Width 185 cm
73 in.
Diameter 60 cm
23.5 in.
Tines type V-tines
Number of tines 45
Number of speeds Two
Drive 3-V powerband belt and sheaves
Conditioner hood Adjustable, single hand crank
Rolls conditioner:
Width 185 cm
73 in.
Diameter 25.4 cm
10 in.
Type of material Urethane
Design Recessed cleat
Speed 664 rpm
Drive Telescoping shaft
Dimensions:
Transport width
3 m
9.8 ft
Transport length
6.3 m
20.6 ft
Weight, roll conditioner With urethane roll conditioner: Equal angle: 2,519 kg
5,553 lb
Weight, impeller conditioner Equal angle: 2,376 kg
5,238 lb
Standard tires Standard: 11L-15
Optional: 31x13.5L 15
General:
Are wrenches required for adjusting?
Header tilt
Yes
2160E