The C400 Mower-Conditioner delivers a fast, clean cut, field after field, season after season.
- Reduce service time with Quick Change Knives
- Updated design and styling
- Decreased horsepower and fuel requirements due to lighter weight1
- Easier serviceability with modular-design cutterbar
- Impeller, urethane or V-10 conditioners
Call Us
- Anna, Ohio937-693-2221
- Franklin, Indiana317-738-2250
- Greenfield, Indiana317-462-5585
- Greensburg, Indiana812-663-5992
- Greenville, Ohio937-548-1151
- Oxford, Ohio513-523-4169
- Richmond, Indiana765-962-7330
- Rushville, Indiana765-932-2977
- Urbana, Ohio937-653-5281
Manufacturer
John Deere
Category
Mower Conditioners
Location
Anna, Ohio
Franklin, Indiana
Greenfield, Indiana
Greensburg, Indiana
Greenville, Ohio
Oxford, Ohio
Richmond, Indiana
Rushville, Indiana
Urbana, Ohio
Specs
Key Specs: | |
---|---|
PTO speed | 1000 rpm |
1000 rpm 1-3/8 in. PTO | 95-150 hp 71-112 kW |
1000 rpm 1-3/4 in. PTO | |
Powerline type | |
Standard hitch | Rockshaft swivel |
Optional hitch | Drawbar swivel |
Hydraulic pressure required | 15,513 kPa 2,250 psi |
Cutterbar - cutting width | 4 m 13 ft |
Number of disks/knifes | 8 16 |
Transport width | 4 m 13 ft |
Power requirements: | |
1000 rpm 1-3/8 in. PTO | |
1000 rpm 1-3/4 in. PTO | |
Powerline type | |
540 rpm PTO | |
PTO speed | |
Tractor equipment: | |
Tractor connection | 21 spline |
Standard hitch | Rockshaft swivel |
Optional hitch | Drawbar swivel |
Hydraulic pressure required | 15,513 kPa 2,250 psi |
Hydraulic connections | |
Cutterbar: | |
Type | John Deere |
Cutting width | 4 m 13 ft |
Cutting height | 2.0-9.5 cm 0.8-3.8 in. |
Number of disks | 8 |
Number of knives | 16 |
Bolted knives | |
Disk speed | 2,650 rpm |
Knife tip speed | 307 km/h 191 mph |
Disk drive | Gear |
Lubrication | Hy-Gard oil |
Oil reservoir capacity | 9.5 L 10 U.S. qt |
Cutterbar oil check | Combination check, drain plug |
Cutterbar angle | |
Angle adjustment | Manual or hydraulic |
Angle range | 2-8 degree (angle) |
Cutterbar protection | ShearHub |
Adjustable gauge shoes | Yes |
Suspension system | |
Impeller conditioner: | |
Width | 268 cm 106 in. |
Diameter | 59.5 cm 23.4 in. |
Tines type | V-tines |
Number of tines | 72 |
Number of speeds | Two |
Drive | 3-V powerband belt and sheaves |
Conditioner hood | |
Wide spread | |
Swath width | |
Rolls conditioner: | |
Width | 279 cm 110 in. |
Diameter | 25.4 cm 10 in. |
Type of material | Urethane or Steel |
Design | Urethane: Recessed cleat, Steel: Intermeshing flutes V-10 |
Speed | 800 rpm |
Drive | Telescoping shaft |
Windrow width | |
Dimensions: | |
Transport width | 4 m 13 ft |
Overall length | |
Transport length | 8.2 m 26.9 ft |
Weight, roll conditioner | |
Weight, impeller conditioner | 2,934 kg 6,470 lb With Urethane roll conditioner: 2,996 kg 6,605 lb With V-10 Steel roll conditioner: 3,086 kg 6,805 lb |
Standard tires | 11L-15 standard 31x13.5L 15, 8PR |
General: | |
Are wrenches required for adjusting? | |
Additional information: | |
Date collected | August 24, 2020 |