The C450 Mower-Conditioner delivers a fast, clean cut, field after field, season after season.
- Easier serviceability with modular-design cutterbar
- Updated design and styling
- Reduce service time with Quick Change Knives
- Steel roll conditioners
- Impeller, urethane, V-10 conditioners or Tri-Lobe conditioners
Call Us
- Anna, Ohio937-693-2221
- Franklin, Indiana317-738-2250
- Greenfield, Indiana317-462-5585
- Greensburg, Indiana812-663-5992
- Greenville, Ohio937-548-1151
- Oxford, Ohio513-523-4169
- Richmond, Indiana765-962-7330
- Rushville, Indiana765-932-2977
- Urbana, Ohio937-653-5281
Manufacturer
John Deere
Category
Mower Conditioners
Location
Anna, Ohio
Franklin, Indiana
Greenfield, Indiana
Greensburg, Indiana
Greenville, Ohio
Oxford, Ohio
Richmond, Indiana
Rushville, Indiana
Urbana, Ohio
Specs
| Key Specs: | |
|---|---|
| PTO speed | 1000 rpm |
| 1000 rpm 1-3/8 in. PTO | 100-150 hp 75-112 kW |
| 1000 rpm 1-3/4 in. PTO | |
| Powerline type | |
| Standard hitch | Rockshaft swivel |
| Optional hitch | Drawbar swivel |
| Hydraulic pressure required | 15,513 kPa 2,250 psi |
| Cutterbar - cutting width | 4.5 m 14.5 ft |
| Number of disks/knifes | 9 18 |
| Transport width | 4.5 m 14.5 ft |
| Power requirements: | |
| 1000 rpm 1-3/8 in. PTO | |
| 1000 rpm 1-3/4 in. PTO | |
| Powerline type | |
| 540 rpm PTO | |
| PTO speed | |
| Tractor equipment: | |
| Tractor connection | 21 spline |
| Standard hitch | Rockshaft swivel |
| Optional hitch | Drawbar swivel |
| Hydraulic pressure required | 15,513 kPa 2,250 psi |
| Hydraulic connections | |
| Cutterbar: | |
| Type | John Deere |
| Cutting width | 4.5 m 14.5 ft |
| Cutting height | 1.6-11.8 cm 0.63-6.7 in. |
| Number of disks | 9 |
| Number of knives | 18 |
| Bolted knives | |
| Disk speed | 2,650 rpm |
| Knife tip speed | 307 km/h 191 mph |
| Disk drive | Gear |
| Lubrication | Hy-Gard oil |
| Oil reservoir capacity | 10.4 L 11 U.S. qt |
| Cutterbar oil check | Combination sight glass, drain plug |
| Cutterbar angle | |
| Angle adjustment | Manual or hydraulic |
| Angle range | 2-8 degree (angle) |
| Cutterbar protection | ShearHub |
| Adjustable gauge shoes | Yes |
| Suspension system | |
| Impeller conditioner: | |
| Width | 268 cm 106 in. |
| Diameter | 59.5 cm 23.4 in. |
| Tines type | V-tines |
| Number of tines | 72 |
| Number of speeds | Two |
| Drive | 3-V powerband belt and sheaves |
| Conditioner hood | |
| Wide spread | |
| Rolls conditioner: | |
| Width | 269 cm 106 in. |
| Diameter | 25.4 cm 10 in. |
| Type of material | Urethane or Steel |
| Design | Urethane: Recessed cleat, Steel Intermeshing flutes (V-10 and Tri-Lobe) |
| Speed | 800 rpm |
| Drive | Telescoping shaft |
| Windrow width | |
| Dimensions: | |
| Transport width | 4.5 m 14.5 ft |
| Overall length | |
| Transport length | 8.8 m 28.9 ft |
| Weight, roll conditioner | With Urethane roll conditioner: 3,161 kg 6,969 lb With V-10 steel roll conditioner: 3,270 kg 7,209 lb With tri-lobe steel roll conditioner: 3,325 kg 7,330 lb |
| Weight, impeller conditioner | 3,078 kg 6,785 lb |
| Standard tires | 31x13.5-15, 8PR |
| General: | |
| Are wrenches required for adjusting? | |
| Additional information: | |
| Date collected | August 24, 2020 |