CR8 Corn Head Header powers through tough corn. The entrance into the auger bed floor of the CR8 Corn Head has been lowered.
- Minimize tire and track damage from stubble with Stalk Deflectors
- Easily harvest down and leaning corn with Active End Fenders
- Size residue less than 6 inches with RowMax™ Chopping Stalk Rolls
Call Us
- Anna, Ohio937-693-2221
- Franklin, Indiana317-738-2250
- Greenfield, Indiana317-462-5585
- Greensburg, Indiana812-663-5992
- Greenville, Ohio937-548-1151
- Oxford, Ohio513-523-4169
- Richmond, Indiana765-962-7330
- Rushville, Indiana765-932-2977
- Urbana, Ohio937-653-5281
Manufacturer
John Deere
Category
Corn Heads
Location
Anna, Ohio
Franklin, Indiana
Greenfield, Indiana
Greensburg, Indiana
Greenville, Ohio
Oxford, Ohio
Richmond, Indiana
Rushville, Indiana
Urbana, Ohio
Specs
| Key Specs: | |
|---|---|
| Approximate overall width | With 70-cm (27.6-in.) row spacing: 6.17 m 20.25 ft With 75-cm (29.5-in.) row spacing: 6.1 m 20.01 ft With 76.2-cm (30-in.) row spacing: 6.15 m 20.4 ft With 91.4-cm (36-in.) row spacing: 7.7 m 25.2 ft With 96.5-cm (38-in.) row spacing: 7.6 m 25 ft |
| Approximate folded width | |
| Row spacings | 70, 75, 76.2, 91.4, or 96.5 cm 27.6, 29.5, 30, 36, or 38 in. |
| Deck plate adjustment | Hydraulic adjustment |
| Gathering chain adjustment | Spring loaded, self-adjusting |
| Gathering chains | Heavy-duty, 620, endless steel roller chain with chromed pins (no master connecting link) |
| Corn Head: | |
| Gathering points | Four-position, low-profile floating type hinged above gathering chains |
| Center and outer gatherings | Hinged, quickly removable |
| Gathering chains | Heavy-duty, 620, endless steel roller chain with chromed pins (no master connecting link) |
| Minimum clearance between gathering chains and ground | 32 mm 1.25 in. |
| Row unit drive | Enclosed, submerged-in-lubricant gearbox, driven by single input hexagon shaft |
| Gathering chain adjustment | Spring loaded, self-adjusting |
| Stalk rolls | Opposed, intermeshing, and chopping (two per row-unit) |
| Deck plate adjustment | Hydraulic adjustment |
| Slip clutch | One per row-unit plus auger drive |
| Trash knives | Full-length, one-piece, heat-treated steel |
| Stalk deflectors | Factory-installed option |
| Dimensions: | |
| Approximate overall width | With 70-cm (27.6-in.) row spacing: 6.17 m 20.25 ft With 75-cm (29.5-in.) row spacing: 6.1 m 20.01 ft With 76.2-cm (30-in.) row spacing: 6.15 m 20.4 ft With 91.4-cm (36-in.) row spacing: 7.7 m 25.2 ft With 96.5-cm (38-in.) row spacing: 7.6 m 25 ft |
| Approximate folded width | Points in operating position (lowered) 3.2 m 10.58 ft Points folded up (service position) With 70-cm (27.6-in.) row spacing: 2.6 m 8.58 ft With 75-cm (29.5-in.) row spacing: 2.6 m With 76.2-cm (30-in.) row spacing: 2.6 m With 91.4-cm (36-in.) row spacing: 3.2 m 10.58 ft With 96.5-cm (38-in.) row spacing: 3.2 m |
| Approximate shipping weight (includes shipping skid) | With 70-cm (27.6-in.) row spacing: 2667 kg 5880 lb With 75-cm (29.5-in.) row spacing: 4275 kg 9425 lb With 76.2-cm (30-in.) row spacing: 2917 kg 6431 lb With 91.4-cm (36-in.) row spacing: 2764 kg 6094 lb With 96.5-cm (38-in.) row spacing: 3965 kg 8741 lb |
| Row spacings | 70, 75, 76.2, 91.4, or 96.5 cm 27.6, 29.5, 30, 36, or 38 in. |
| Standard weight | With 70-cm (27.6-in.) row spacing: non StalkMaster™ 2670 or StalkMaster 2917 kg 5886 or 6431 lb With 75-cm (29.5-in.) row spacing: non StalkMaster 2658 or StalkMaster 2764 kg 5860 or 6094 lb With 76.2-cm (30-in.) row spacing: non StalkMaster 2575 or StalkMaster 2829 kg 5677 or 6237 lb With 91.4-cm (36-in.) row spacing: non StalkMaster 2760 or StalkMaster 3074 kg 6085 or 6777 lb With 96.5-cm (38-in.) row spacing: non StalkMaster 2487 or StalkMaster 2667 kg 5483 or 5880 lb |
| Additional information: | |
| Date collected | 15 June 2020 |