Learn more about the features, specifications, and more for the HDF50 Flexible Cutterbar Draper Platform.
- Capture more crop in rolling and uneven terrain with a total wing range of 45”
- Experience the best of both worlds with a flexible cutterbar on a hinged draper
- Easily cut all crops with a consistent reel-to-cutterbar distance and improved reel torque
- Reduce cutterbar loss with Grain Saver Draper Belts
Call Us
- Anna, Ohio937-693-2221
- Franklin, Indiana317-738-2250
- Greenfield, Indiana317-462-5585
- Greensburg, Indiana812-663-5992
- Greenville, Ohio937-548-1151
- Oxford, Ohio513-523-4169
- Richmond, Indiana765-962-7330
- Rushville, Indiana765-932-2977
- Urbana, Ohio937-653-5281
Manufacturer
John Deere
Category
Draper Platforms
Location
Anna, Ohio
Franklin, Indiana
Greenfield, Indiana
Greensburg, Indiana
Greenville, Ohio
Oxford, Ohio
Richmond, Indiana
Rushville, Indiana
Urbana, Ohio
Specs
| Key Specs: | |
|---|---|
| Cutterbar length | 15.3 m 50.1 ft |
| Knife drive | Double-cut, dual-drive, shaft-driven cutterbar: 10.2 cm 4 in. |
| Knife speed | X Series Combine: 520 cycles/min S-Series Combine: 490 cycles/min |
| Pickup reel operating speeds | 8-70 rpm |
| Draper belts speed control | Hydraulic from cab (side belts only) |
| Platform: | |
| Type | Hinged frame flexible cutterbar |
| Cutterbar: | |
| Type | Straight-line knife drive system |
| Length | 15.3 m 50.1 ft |
| Knife drive | Double-cut, dual-drive, shaft-driven cutterbar: 10.2 cm 4 in. |
| Knife speed | X Series Combine: 520 cycles/min S-Series Combine: 490 cycles/min |
| Cutterbar tilt | |
| Base skid shoe height | 3.8 cm 1.5 in. |
| Pickup reel: | |
| General | |
| Number of slats | Six bat poly |
| Fingers | Nylon |
| Diameter | 106.7 cm 42 in. |
| Height control | Hydraulic |
| Speed control | Hydraulic |
| Reel lift | Off the cutterbar: 100.6 cm 39.6 in. |
| Reel fore and aft | Fore of the cutterbar: 26.4 cm 10.4 in. |
| Fore of the cutterbar | |
| Reel resume | Base |
| Reel reverse | Base |
| Operating speeds | 8-70 rpm |
| Operating speeds (54-in. reel) | |
| Slat reel: | |
| Number of slats | |
| Diameter | |
| Height control | |
| Speed control | |
| Operating speeds | |
| Draper belts: | |
| Width | Side belts: 6.7 m 21.9 ft Center belts: 200 cm 79 in. |
| Belt depth | 100 cm 39.8 in. |
| Cleat height | 19 mm 0.75 in. |
| Operating speed | |
| Speed control | Hydraulic from cab (side belts only) |
| Center belt reverse | Base |
| Feed drum: | |
| Diameter | 40.6 cm 16 in. |
| Feed drum fingers | Heavy-duty and round with breakaway notch and retainer Diameter: 16 mm 0.625 in. |
| Number of fingers | 18 |
| Auger finger platform | Triple chevron, retracting |
| Finger reach | 152 mm 6 in. |
| Drum/auger reverse | Base |
| Operating speed | Low speed: 200 rpm High speed: 240 rpm |
| Center cleanout door | Base |
| Header height sensing: | |
| Type | Electrohydraulic |
| Header height sensing on the ground | Base |
| Header height sensing off the ground | Base |
| Top auger: | |
| Type | Optional: hydraulic drive 250-350 rpm |
| Fingered augers | Optional |
| Size | Diameter: 43.2 cm 17 in. |
| Dimensions: | |
| Platform length | 16.1 m 52.9 ft |
| Overall operating depth | With dividers: 3.2 m 10.6 ft |
| Transport width, field position | |
| Transport width on wheel, less dividers | |
| Transport length, hitch extended | |
| Weight: | |
| Approximate weight | |
| Additional information: | |
| Date collected | 24 Mar 2021 |