The S300 Mower-Conditioner delivers a fast, clean cut, field after field, season after season.
- Reduce service time with Quick Change Knives
- Updated design and styling
- Impeller, urethane or V-10 conditioners
- Cutting platform is gear-driven
Call Us
- Anna, Ohio937-693-2221
- Franklin, Indiana317-738-2250
- Greenfield, Indiana317-462-5585
- Greensburg, Indiana812-663-5992
- Greenville, Ohio937-548-1151
- Oxford, Ohio513-523-4169
- Richmond, Indiana765-962-7330
- Rushville, Indiana765-932-2977
- Urbana, Ohio937-653-5281
Manufacturer
John Deere
Category
Mower Conditioners
Location
Anna, Ohio
Franklin, Indiana
Greenfield, Indiana
Greensburg, Indiana
Greenville, Ohio
Oxford, Ohio
Richmond, Indiana
Rushville, Indiana
Urbana, Ohio
Specs
| Key Specs: | |
|---|---|
| PTO speed | 540 or 1000 rpm |
| 1000 rpm 1-3/8 in. PTO | 65-150 hp 48-112 kW |
| 1000 rpm 1-3/4 in. PTO | |
| Powerline type | |
| Standard hitch | Clevis |
| Optional hitch | Equal angle, Rockshaft swivel or Drawbar swivel |
| Hydraulic pressure required | 13,790 kPa 2,000 psi |
| Cutterbar - cutting width | 3 m 9.75 ft |
| Number of disks/knifes | 6 12 |
| Transport width | 3 m 9.75 ft |
| Power requirements: | |
| PTO speed | 540 rpm |
| 540 rpm PTO | 65-81 hp 48-60 kW |
| 1000 rpm 1-3/8 in. PTO | |
| 1000 rpm 1-3/4 in. PTO | |
| Powerline type | |
| Tractor equipment: | |
| Tractor connection | 21 spline |
| Standard hitch | Clevis |
| Optional hitch | Equal angle, Rockshaft swivel or Drawbar swivel |
| Hydraulic pressure required | 13,790 kPa 2,000 psi |
| Hydraulic connections | |
| Cutterbar: | |
| Type | John Deere |
| Cutting width | 3 m 9.75 ft |
| Cutting height | 2.8-9.8 cm 1.1-3.8 in. |
| Number of disks | 6 |
| Number of knives | 12 |
| Bolted knives | |
| Disk speed | 2,650 rpm |
| Knife tip speed | 307 km/h 191 mph |
| Disk drive | Gear |
| Lubrication | Hy-Gard oil |
| Oil reservoir capacity | 7 L 7.4 U.S. qt |
| Cutterbar oil check | Combination check, drain plug |
| Cutterbar angle | |
| Angle adjustment | Manual or hydraulic |
| Angle range | 2-8 degree (angle) |
| Cutterbar protection | ShearHub |
| Adjustable gauge shoes | Yes |
| Suspension system | |
| Impeller conditioner: | |
| Width | 185.4 cm 73 in. |
| Diameter | 59.4 cm 23.4 in. |
| Tines type | V-tines |
| Number of tines | 45 |
| Number of speeds | Two |
| Drive | 3-V powerband belt and sheaves |
| Conditioner hood | |
| Wide spread | |
| Rolls conditioner: | |
| Width | 187.8 cm 73 in. |
| Diameter | |
| Type of material | Urethane or steel |
| Design | Urethane: Recessed cleat, Steel: Intermeshing flutes V-10 |
| Speed | 664 rpm |
| Drive | Telescoping shaft |
| Windrow width | |
| Dimensions: | |
| Transport width | 3 m 9.75 ft |
| Overall length | |
| Transport length | With equal angle 6.2 m 20.6 ft |
| Weight, roll conditioner | |
| Weight, impeller conditioner | 2,130 kg 4,696 lb With Urethane roll conditioner: 2,272 kg 5,012 lb With Steel roll conditioner: 2,322 kg 5,120 lb With Impeller conditioner: 2,130 kg |
| Standard tires | 11L-15 standard, 31x13.5L optional 31x13.5L 15 optional |
| General: | |
| Are wrenches required for adjusting? | |
| Additional information: | |
| Date collected | August 24, 2020 |