John Deere Model Year 2023 2032R Compact Tractor

Specs
Key Specs:
Engine power (gross)SAE J1995 rated power: 22.9 kW
30.7 hp
31.2 PS at 2500 rpm
Power take-off (PTO) power18 kW
24.2 hp
Steering hydraulics15 L/min
4 gpm
Implement hydraulics20.2 L/min
5.3 gpm
Hitch typeCategory 1
Lift capacity, 24-in. behind link arms615 kg
1356 lb
Standard transmission; forward/reverseHydrostatic transmission (HST)
Cruise controlStandard
Approximate shipping weight (open-station; cab)Open station: 1306 kg
2879 lb
Cab: Not applicable
Wheelbase1723 mm
67.8 in.
Engine:
Family
ManufacturerYanmar®
Engine model3TNV88C-NJT2
Engine power (gross)SAE J1995 rated power: 22.9 kW
30.7 hp
31.2 PS at 2500 rpm
Power take-off (PTO) power18 kW
24.2 hp
Rated engine speed2500 rpm
TypeDirect Injection
Injection pump typeDirect Injection
AspirationNatural
Emissions complianceFinal Tier 4
Cylinders/displacementThree cylinders: 1.642 L
100.2 cu in.
Number of cylindersThree
Cylinder linersCast-in-block
Bore and stroke88x90 mm
3.46x3.54 in.
Compression ratio19.1:1
LubricationPressurized
Cooling systemWater pump
Air cleanerDual element
Engine torque at rated speed87.5 Nm
64.5 lb-ft
Fuel tank capacity32 L
8.5 U.S. gal.
Electrical:
Battery size500 CCA
Alternator (12-V)85 amp
Starter size1.4 kW
1.9 hp
Fuel system:
TypeDirect Injection
Fuel consumption
Transmission:
Standard transmission; forward/reverseHydrostatic transmission (HST)
Optional transmission; forward/reverse
Left-hand reverser
Transmission gear ranges
Final driveSpur gear
BrakesWet disc
SteeringPower steering
Clutch, wet/dry
Clutch disk diameter wet clutch
Axle capacityFront
880 kg
1940 lb
Rear
1800 kg
3968 lb
CreeperNo
Cruise controlStandard
Differential lockYes
Drawbar maximum vertical load
Hydraulics:
TypeOpen center
Pump rated outputSteering
15 L/min
4 gpm
Implement
20.2 L/min
5.3 gpm
35.2 L/min
9.3 gpm
Pump typeDual gear
Maximum operating pressure172 bar
2495 psi
Draft control sensingPosition control
Remote control valves availableUp to three
3-point hitch:
TypeCategory 1
Lift capacity, 24-in. behind link arms615 kg
1356 lb
Power take-off (PTO):
StandardRear: 543 rpm
Mid: 1998 rpm
Optional
ControlIndependent
ClutchWet disc
Brake (for mid and rear PTO)Wet disc
Engagement method
Fluid capacities:
Crankcase with filter4.5 L
4.8 gal.
Transmission and hydraulic system
Final drive:
TypeSpur Gear
Differential lockYes
Operator station:
Rollover protective structureType
Foldable
ASABE S478
Platform - flat/straddleSemi-flat
Gear shift location - console/floor
Cab:
Compliance
Visibility
Air conditioning, temperature differential
Doors
Noise rating
Seat equipment
Dimensions:
Height
Wheelbase1723 mm
67.8 in.
Front axle clearance
Turning radius with brakes2.46 m
8.07 ft
Turning radius without brakes
Limited slip differential
Approximate shipping weight (open-station; cab)Open station: 1306 kg
2879 lb
Cab: Not applicable
Tires:
FrontR1 Ag 7.00-12
R3 Turf 23x8.50-14
R4 Industrial 23x8.50-14
R3 Turf Radial 200/60 R15
RearR1 Ag 12.4-16
R3 Turf 14-17.5
R4 Industrial 14-17.5
R3 Turf Radial 300/70 R20
Front tread range
Rear tread spacing
Miscellaneous:
ToolboxYes
Tilt steering wheelYes
12-V OutletYes
Additional information:
Date collected
Videos