
The X734 signature series 4-wheel steer mower allows you to trim closely around trees tight fence corners and more. Explore all features and specs.
- 25.5-hp (19 kW) iTorque™ Power System
- Power four-wheel steer, power lift system, Twin-Touch™ forward and reverse foot pedals
- 4-year/700-hour bumper-to-bumper warranty
- Available in 48-, 54-, and 60-inch mower deck sizes
Call Us
- Amelia, Ohio513-797-4500
- Bloomington, Indiana812-336-4133
- Botkins, Ohio937-693-2201
- Franklin, Indiana317-738-2250
- Germantown, Ohio937-855-6536
- Greenfield, Indiana317-462-5585
- Greensburg, Indiana812-663-5992
- Greenville, Ohio937-548-1151
- Lebanon, Ohio513-932-3961
- Oxford, Ohio513-523-4169
- Richmond, Indiana765-962-7330
- Rushville, Indiana765-932-2977
- Tipp City, Ohio937-877-1920
- Urbana, Ohio937-653-5281
Buy Online
Manufacturer
John Deere
Category
X700 Signature Series
Location
Amelia, Ohio
Bloomington, Indiana
Botkins, Ohio
Franklin, Indiana
Germantown, Ohio
Greenfield, Indiana
Greensburg, Indiana
Greenville, Ohio
Lebanon, Ohio
Oxford, Ohio
Richmond, Indiana
Rushville, Indiana
Tipp City, Ohio
Urbana, Ohio
Specs
Key Specs: | |
---|---|
Engine power | 25.5 hp 19 kW |
Oil change | |
Engine manufacturer/model | FD750D EFI |
Transaxle type | K90 hydrostatic integrated with transaxle |
Transaxle control | Twin Touch™ pedals |
Rear tires | 26x10.5-12 turf |
Lift system type | Two-function hydraulic |
Cutting width | Accel Deep™ mower deck, 48 in. 122 cm High capacity mower deck, 54, 60 in. 137, 152 cm |
U.S. warranty | 4 year/700 hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
Engine: | |
Power | 25.5 hp 19 kW |
Displacement | 45.5 cu in. 745 cc |
Manufacturer/model | FD750D EFI |
Type | Electronic fuel injection (EFI), overhead valve, full-pressure lube, oil filter |
Cylinders | V-twin, cast-iron liners |
Governor | Mechanical |
Choke/speed control | No choke required |
Cooling method | Liquid |
Air cleaner | Dry, replaceable with foam precleaner |
Oil change | No tools |
Fuel system: | |
Type | Gasoline |
Fuel delivery | Electronic fuel injection |
Fuel gauge | Gauge on dash |
Fuel tank location | Rear |
Fuel fill opening | On left fender, 3 in. 7.6 cm |
Fuel tank capacity | 5.2 U.S. gal. 19.7 L |
Electrical system: | |
Battery | 12 V 340 CCA |
Charging system | Flywheel alternator, regulated, 20 amp |
Engine starter | Solenoid shift |
Hour meter | Yes |
Headlights | Two standard, halogen, 37 W |
Taillights or reflector | Taillights |
Backup lights | Yes |
Rear work lights | Yes |
12-V outlet | Yes |
Transaxle: | |
Type | K90 hydrostatic integrated with transaxle |
Control | Twin Touch™ pedals |
Cruise control | Yes |
Oil cooler | Yes |
Oil filter | Replaceable suction side 10 micron |
Differential lock | Standard |
Forward speed | 0-8.5 mph 0-13.7 km/h |
Reverse speed | 0-6 mph 0-9.7 km/h |
Brakes | Internal wet disc |
Chassis: | |
Frame | Welded heavy-duty |
Primer/paint | E-coat/powder |
Weight bracket | Standard front - holds up to four Quik-Tatch weights, 42 lb 19 kg |
Receiver hitch | Yes, front |
Front axle | JDM BA8 nodular iron casting |
Spindle bushings | Metal, replaceable |
Front tires | 18x7-8 turf |
Rear tires | 26x10.5-12 turf |
Hood material | Noryl GTX902, painted |
Fender deck material | Stamped steel |
Floor mats | Sure-grip rubber |
Storage | Covered toolbox |
Service interval decal | Yes |
Fender handles/grips | Handles |
Cup holder | Yes |
Equipment mounting | Optional category 1 3-point hitch |
Maximum towing capacity | 1,000 lb 454 kg |
Steering: | |
Type | Hydraulic power |
Four-wheel steer | Yes |
Steering wheel | 14 in. 35.6 cm |
Tilt steering wheel | Standard, six position |
Turning radius | 21 in. 53.3 cm |
Uncut circle radius | 54 HC, 10 in. 25.4 cm 60 HC, 6 in. 15.2 cm |
Seat: | |
Type | Two-piece adjustable seat with brand embroidery |
Seat back height | 21 in. 53.3 cm |
Armrests | Optional |
Fore-aft adjustment | While seated, slide rail, 14-position, 7 in. 17.8 cm |
Seat suspension | Six-position parallel arm |
Lift system: | |
Type | Two-function hydraulic |
Hydraulic outlets | Four, standard |
Mower cut height | 1-5.25 in. 2.5-13.3 cm |
Cut height increments | 0.25 in. 0.64 cm |
Preset cut height | Yes |
Mower deck: | |
Type | Side discharge |
Cutting width | Accel Deep™ mower deck, 48 in. 122 cm High capacity mower deck, 54, 60 in. 137, 152 cm |
Construction | Forged steel deck shell |
Mower deck material | 48A, 10 gauge 0.135 in. 3.4 mm 54 HC and 60 HC, 9 gauge 0.150 in. 3.8 mm |
Mower wash port | Yes |
Mower drive system | Hydraulic clutch, shaft |
Mower wheels | 48A, four and center front roller 54 and 60 HC, four with optional center front roller |
Mower wheel adjustment | Spring-loaded pin |
Mower level adjustment | Exact Adjust ports and onboard deck-leveling gauge |
Mower attachability: | |
Type | Roll under tractor (48A) Drive-over deck (54, 60 HC) |
Front draft arms | Overcenter |
Rear draft arms | V-align |
Mower wheels rotate | Yes, 90 degrees for easy mower removal (48A), N/A (54 HC, 60 HC) |
Drive system | Shaft or AutoConnect |
Safety: | |
Meets ANSI standard | Yes |
Meets OPEI standard | Yes |
Backup protection | Reverse Implement Option (RIO) |
Safety video | Yes |
Buyer's notes: | |
Notes | Styled alloy wheels are standard equipment One-piece hood for easy engine access Hydraulic modulated PTO clutch for smooth mower and implement engagement |
Warranty | 4 year/700 hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
Optional equipment: | |
Mowers | 48A, 54 HC, 60 HC |
Rear bagger | 7, 14, 19 bu 250, 500, 670 L |
Powered material collection | Power Flow, 7, 14, 19 bu 250, 500, 670 L |
Mulching system | Yes, MulchControl™ |
Front thatcher | 38, 46, 54 in. 96.5, 116.8, 137.2 cm |
Front blade | 54 in. 137.2 cm |
Mid-mount blade | |
Snow blower | Two-stage, 47, 54 in. 119.4, 137.2 cm |
Rotary broom | 52, 60 in. 132.1, 152.4 cm |
Rotary tiller | 42, 48 in. 106.7, 121.9 cm |
Sleeve hitch | |
3-point hitch | Category 1 |
Rear power take-off (PTO) | 540 rpm |
Plow, moldboard | Adjustable, 8-14 in. 20.3-35.6 cm |
Box scraper | 48 in. 121.9 cm |
Cultivator | Adjustable, 30-46 in. 76.2-116.8 cm |
Rear blade | 60 in. 152.4 cm |
Disk harrow | Adjustable, 42-52 in. 106.7-132.1 cm |
Landscape rake | 60 in. 152.4 cm |
Sprayer | Tow-behind, 15, 25, 45 U.S. gal. 56.8, 94.6, 170.3 L Mounted, 25 U.S. gal. 94.6 L |
Spreader | Tow-behind, 125, 175 lb 57.7, 79.4 kg Mounted, 125 lb 57.7 kg |
Front bumper | Standard bumper/weight bracket |
Brush guard | Yes |
Weather protection | Hard-side cab, weather enclosure |
Sun canopy | |
Rear receiver hitch | 1.25 x 1.25 in. 3.18 x 3.18 cm |
Bucket holder | Yes, double bucket |
Grass striping | Grass groomer kit, 48-in. (122-cm) mower only |
Tractor shovel | 54 in. 137.2 cm |
Front loader | Not available |
Other equipment | |
Tow-behind tools | 21 |
Dimensions: | |
Height | 54.5 in. 1384 mm |
Overall length | 75 in. 1905 mm |
Wheelbase | 54.5 in. 1384 mm |
Width with mower | 48A: 62.5 in. 1588 mm 54 HC: 64.5 in. 1638 mm 60 HC: 74 in. 1880 mm |
Width with mower (deflector raised for storage) | 48A: 53.6 in. 1362 mm 54 HC: 57.5 in. 1461 mm 60 HC: 62 in. 1575 mm |
Width without mower | 47 in. 1195 mm |
Weight | No fuel or mower, 912 lb 414 kg |
Additional information: | |
Manufacturing location | Horicon, Wisconsin, USA |
Date collected | 1-Aug-23 |