John Deere Z915E ZTrak™ Zero-Turn Mower

Key Specs:
Engine Manufacturer/model CV742
Engine Power Gross at 3,600 rpm: 25 hp
18.6 kW
Fuel tank capacity 11.5 U.S. gal.
43.5 L
Mower deck Size 48, 54, 60 in.
122, 137, 152 cm
Blade tip speed Approximately 18,000 fpm
5,486 m/min
Transmission Hydrostatic
Speed range 0-10 mph
0-16.1 km/h
Drive wheels 24x9.5-12 (48 in.), 24x12-12 (54 in., 60 in.)
Caster wheels 13x5-6
Warranty 36 months or 1200 hours, whichever comes first
First 24 months, no hour limitation
Engine:
Manufacturer/Model CV742
Power At 3,600 rpm, 25 hp
18.6 kW
Displacement 45.6 cu in.
747 cc
Cylinders Two
Crankcase capacity With filter, 2 U.S. qt
1.9 L
Oil filter Full flow, replaceable
Lubrication Full pressure
Cooling Air
Air cleaner Pre-cleaner
Yes
Heavy-duty canister type with safety element
Fuel system:
Fuel type Gasoline
Fuel consumption Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr
4.2-7.2 L/hr
Fuel tank capacity 11.5 U.S. gal.
43.5 L
Fuel tank switch/shut-off valve Yes
Electrical system:
Charge system 15 amp
Battery voltage 12 V
Cold cranking amp 300 amp
Hour meter Standard, digital
Operator presence starting system Brake-N-Go (hand)
Drivetrain:
Transmission Hydrostatic
Wheel motors Tuff Torq heavy-duty integrated piston wheel motor
Travel speed Speed range
0-10 mph
0-16.1 km/h
Forward
0-10 mph
0-16.1 km/h
Reverse
0-4.5 mph
0-7.2 km/h
Speed and direction control Twin levers
Hydraulic capacity 5.9 U.S. qt
5.6 L
Filter Internal, replaceable
Buyer's note:
Warranty 36 months or 1200 hours, whichever comes first
First 24 months, no hour limitation
Tires:
Drive wheels 24x9.5-12 (48 in.), 24x12-12 (54 in., 60 in.)
Load rating 4 PR
Brakes:
Dynamic braking Twin levers
Park brake Internal wet disk integrated in the transmission
Park brake actuation Hand brake
PTO:
Type Electro-magnetic, 200 lb-ft
271 Nm
Drive V-belt
Mower decks:
Size 48, 54, 60 in.
122, 137, 152 cm
Deck construction One-piece stamped steel with reinforcements
Deck thickness 7 gauge
0.18 in.
4.6 mm
Discharge Side
Height-of-cut range Increments
0.25 in.
0.64 cm
1-5.5 in.
2.54-14 cm
Cutting width 48, 54, 60 in.
122, 137, 152 cm
Blades:
Length Varies by deck size
Thickness 0.25 in.
0.64 cm
Blade tip speed Approximately 18,000 fpm
5,486 m/min
Number Three
Wheels:
Caster wheel type Pneumatic Front
Caster wheels 13x5-6
Front anti-scalp rollers RH, center, LH
Rear anti-scalp rollers Optional
Dimensions:
Length 84 in.
213 cm
Width With chute down, 62, 68, 74 in.
157, 173, 188 cm
Height With ROPS up, 73 in.
185 cm
With ROPS down, 47 in.
119 cm
Weight 1,100 to 1,178 lb
499 to 534 kg
Additional information:
Date collected 23-May-2018