John Deere Z970R Zero-Turn Mower

Key Specs:
Engine Manufacturer/model FX1000V
Engine Power Gross at 3,600 rpm: 35 hp
26.1 kW
Fuel tank capacity 11.5 U.S. gal.
43.5 L
Mower deck Size 60, 72 in.
152, 183 cm
Blade tip speed Approximately 18,000 fpm
5,486 m/min
Transmission Hydrostatic
Speed range 0-12 mph
0-19.3 km/h
Drive wheels 24x12-12
Caster wheels 13x6.5-6
Warranty 36 months or 1500 hours, whichever comes first
First 24 months, no hour limitation
Engine:
Manufacturer/Model FX1000V
Power Gross at 3,600 rpm, 35 hp
26.1 kW
Displacement 61 cu in.
999 cc
Cylinders Two
Crankcase capacity With filter, 2 U.S. qt
1.9 L
Oil filter Full flow, replaceable
Lubrication Full pressure
Cooling Air
Air cleaner Pre-cleaner
Yes
Heavy-duty canister type with safety element
Fuel system:
Fuel type Gasoline
Fuel consumption Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr
4.2-7.2 L/hr
Fuel tank capacity 11.5 U.S. gal.
43.5 L
Fuel tank switch/shut-off valve Yes
Electrical system:
Charge system 20 amp
Battery voltage 12 V
Cold cranking amp 300 amp
Hour meter Standard, digital
Operator presence starting system Brake-N-Go (foot)
Drivetrain:
Transmission Hydrostatic
Wheel motors Tuff Torq heavy-duty integrated piston wheel motor
Travel speed Speed range
0-12 mph
0-19.3 km/h
Forward
0-12 mph
0-19.3 km/h
Reverse
0-4.5 mph
0-7.2 km/h
Speed and direction control Twin levers
Hydraulic capacity 5.9 U.S. qt
5.6 L
Filter Internal, replaceable
Buyer's note:
Warranty 36 months or 1500 hours, whichever comes first
First 24 months, no hour limitation
Tires:
Drive wheels 24x12-12
Load rating 4 PR
Brakes:
Dynamic braking Twin levers
Park brake Internal wet disk integrated in the transmission
Park brake actuation Foot brake
PTO:
Type Electro-magnetic, 225 lb-ft
305 Nm
Drive V-belt
Mower decks:
Size 60, 72 in.
152, 183 cm
Deck construction 7-Iron PRO, one-piece stamped steel with reinforcements
Deck thickness 7 gauge
0.18 in.
4.6 mm
Discharge Side, MOD
Height-of-cut range Increments
0.25 in.
0.64 cm
1-5.5 in.
2.54-14 cm
Cutting width 60, 72 in.
152, 183 cm
Blades:
Length Varies by deck size
Thickness 0.25 in.
0.64 cm
Blade tip speed Approximately 18,000 fpm
5,486 m/min
Number Three
Wheels:
Caster wheel type Flat free
Caster wheels 13x6.5-6
Front anti-scalp rollers RH, center, LH
Rear anti-scalp rollers Optional
Dimensions:
Length 84 in.
213 cm
Width With chute down, 74, 86 in.
188, 218 cm
Height With ROPS up, 73 in.
185 cm
With ROPS down, 47 in.
119 cm
Weight 1,336 to 1,345 lb
606 to 610 kg
Additional information:
Date collected 23-May-2018