Information Management

YIELD DOCUMENTATION

View on-the-go harvest information for potatoes, onions, sugar beets, and other specialty crops.
Transfer your data into John Deere Operations Center to make better decisions.

JDLINK

Our JDLink Modems connects your machines for fast data transfer and brings connectivity to your entire fleet regardless of equipment brand or age
Stream machine and field data to your John Deere Operations Center account.
Remote support from your dealer
Track and document agronomic data by pairing a G5 or Generation 4 Display

OPERATIONS CENTER

See whats happening in your operation right now, and learn from your performance over time.
Collaborate with the right people and tools to make decisions that save time, optimize yield, and maximize profits.
Direct your operations by turning your plans into action, and adjusting as conditions change.

CONNECT MOBILE

Monitor the performance of your combine, planter, or sprayer.
Understand what adjustments can improve the job performance.
View detailed machine information to maximize results from the work you do to make better decisions in the future.

DATA SYNC

Save time Auto-populate machines in-field with latest setup data
Increase accuracy Avoid manual entry errors and duplicates for better record retention and analysis
Increase Efficiency Seamlessly and automatically manage in-season changes throughout your entire connected operation

HARVEST IDENTIFICATION COTTON

Eliminates manual tagging of modules
Provides module tracking, tracing, and delivery to the gin
Document cotton harvest on-the-go

HARVEST MOBILE

Optimize combine performance through Interactive Combine Adjustment (ICA)
Integrates easily with existing John Deere technology
Become more efficient increasing yield and decreasing costs by growing your knowledge of what works best for your operation.

IN FIELD DATA SHARING

See coverage and as-applied maps for machines working in the same field at the same time.
Ensure complete field coverage with multiple machines even in low light and/or dusty conditions.
Reduce over-application leading to more accurate documentation data and lower input costs.

JDLINK M MODEM

Wirelessly stream machine data to John Deere Operations Center or Operations Center Mobile
Near real-time monitoring of data such as machine location, fuel levels, transport, and idle times
Fast installation in as little as 15 minutes, which makes it easier to transfer to other machines
Enable machine-to-machine communication AND remote support from your John Deere dealer
Track and document agronomic data by pairing a G5 or Generation 4 Display

HARVEST LAB CONSTITUENT SENSING

On-the-go measuring of moisture, dry matter, protein, starch, fiber, neutral detergent fiber, acid detergent fiber, and sugar
Automatically adjust inoculant dosage based on current dry matter level
Automatically adjust length-of-cut, on the go
The HarvestLab 3000 equipped with a turn table ensure a more frequent and more accurate evaluation of the ensiled material before rations are mixed.
Utilize your HarvestLab 3000 all year long with the dual use capabilities of the Sensor for forage harvest and bunk management with the stationary turn table.

HARVEST LAB 3000

On-the-go measuring of moisture, protein, starch and oil values in wheat, barley and rapeseed/canola
Available as a dealer kit for S700 Series Combines (MY18 and newer)
View your data in the combine or in the John Deere Operations Center
Know how much nitrogen was removed and where it is needed to sustainably optimize yield for next years crop

MANURE CONSTITUENT SENSING

Measure liquid manure nutrient levels in real time using the HarvestLab 3000 sensor
Precisely apply nutrients at targeted or limited levels with automated speed control
Document liquid manure nutrient application to better control total crop nutrient costs
Use nutrient application data layers in John Deere Operations Center to make better decisions
Easily install the system on your current tanker or drag line applicator

MY TRANSFER MOBILE APP

Easily transfer data from your in-cab display to your John Deere Operations Center account
Reduce the risk of data loss
Consolidates data from different display brands into one place.

John Deere Operations Center and JDLink

Every pass you make creates data: where you planted, what you applied and what you harvested. John Deere information management tools move that data from your machines into the John Deere Operations Center, where you can see what is happening in your operation right now and learn from it over time.

Koenig Equipment helps growers across Ohio and Indiana connect machines, set up the Operations Center and put the data to work, with support from our Optimization Specialists.

Person's hands holding a smartphone showing a 2023 wheat harvest yield map with colored data

Which Tool Does What?

Most operations start by connecting machines with JDLink and setting up the Operations Center. The other tools add machine optimization, crop sensing and easier data transfer.

Tool	What it does
Operations Center	See your operation in one place, collaborate with your advisors and turn plans into action
JDLink and JDLink M modem	Connect machines of any brand or age and stream machine and field data to the Operations Center, with remote support from your dealer
Data Sync	Auto-populate machines in the field with the latest setup data, and avoid manual entry errors
In-Field Data Sharing	See coverage and as-applied maps from machines working the same field at the same time
MyTransfer mobile app	Move data from your in-cab display to the Operations Center, including from other display brands
Connect Mobile and Harvest Mobile	Monitor combine, planter or sprayer performance, and optimize combine settings with Interactive Combine Adjustment
HarvestLab 3000 and constituent sensing	Measure moisture, protein and other values on the go, in grain, forage or liquid manure

Request a quote on any product page and our team will explain current pricing and what your machines already support.

Personal Help Putting Your Data to Work

Technology only pays when it is set up right and used every day. Our Optimization Specialists work one on one with growers on connectivity, Operations Center setup, documentation and maps, and Koenig holds a Precision Ag Academy twice a year for hands-on training.

If you service your own machines, ask about Operations Center PRO Service for technical manuals and diagnostic tools.

Bearded man in black shirt talking to two men in hoodies at a table, backs to camera

Guidance, Displays and Used Precision Equipment

Pair your data tools with John Deere displays, receivers and guidance and field and crop solutions. Learn more about the John Deere Operations Center at Koenig, or browse used precision ag equipment.

John Deere Operations Center FAQs

What is the John Deere Operations Center?
The Operations Center is where your machine and field data come together. It shows what is happening in your operation right now, helps you learn from your performance over time and lets you collaborate with the people and tools you choose.

Does JDLink work on equipment from other brands?
Yes. JDLink modems bring connectivity to your fleet regardless of equipment brand or age, and the JDLink M modem installs in as little as 15 minutes, so it is easy to move between machines.

How do I get data from my display into the Operations Center?
A connected machine with JDLink streams data automatically. You can also use the MyTransfer mobile app to move data from your in-cab display, including other display brands, into your Operations Center account.

Who can help me set up the Operations Center?
Our Optimization Specialists help growers set up accounts, connect machines and use their maps and reports. You can also sign up for the Precision Ag Academy.

Can Koenig support my machines remotely?
JDLink enables remote support from your John Deere dealer, which can help our team troubleshoot a connected machine.