John Deere 3032E Compact Utility Tractor

Field image of 2017 3032E

Utility tractor for life-style farmers and large-estate owners. Visit JohnDeere.com to get information on the newest addition to the compact utility tractor lineup - the 3E Series .

  • Standard four-wheel drive(4WD) for maximum traction
  • Hydro transmission with Twin Touchâ„¢ pedals for ease of use
  • On-board diagnostics including Service Advisor
  • Category 1 3-pt hitch compatible with dozens of implements
Key Specs:
Engine power (gross) 22.9 kW
31.2 hp
Power take-off (PTO) power 18.6 kW
25 hp
Steering hydraulics 15 L/min
4 gpm
Implement hydraulics 20.2 L/min
5.3 gpm
Hitch type Category 1
Lift capacity, 24-in. behind link arms 615.1 kg
1356 lb
Standard transmission; forward/reverse Hydrostatic transmission (HST)
Cruise control Optional
Approximate shipping weight (open-station; cab) 1007.9 kg
2222 lb
Wheelbase 159.5 cm
62.8 in.
Engine:
Family EYDXL1.64NDA
FYDXL1.64NDA
GYDXL1.64NDA
Manufacturer Yanmar
Engine model 3TNV88C-NJT
Engine power (gross) 22.9 kW
31.2 hp
Power take-off (PTO) power 18.6 kW
25 hp
Rated engine speed 2500 rpm
Type Diesel
Injection pump type High pressure common rail direct injection
Aspiration Natural
Emissions compliance Final Tier 4
Cylinders/displacement 3 / 1.64 L
3 / 100.2 cu in.
Number of cylinders Three
Cylinder liners Cast-in-block
Bore and stroke 88 x 90 mm
3.46 x 3.54 in.
Compression ratio 19.1:1
Lubrication Pressurized
Cooling system Water pump
Air cleaner Dual element
Engine torque at rated speed 87 Nm
64.2 lb-ft
Fuel tank capacity 28.5 L
7.5 U.S. gal.
Electrical:
Battery size 500 CCA
Alternator (12-V) 55 amp
Starter size 1.4 kW
1.9 hp
Fuel system:
Type High pressure common rail direct injection
Fuel consumption
Transmission:
Standard transmission; forward/reverse Hydrostatic transmission (HST)
Left-hand reverser No
Final drive Bull Gear
Brakes Wet disc
Steering Power steering
Axle capacity Front
798 kg
1760 lb
Rear
1197 kg
2640 lb
Creeper No
Cruise control Optional
Differential lock Yes
Hydraulics:
Type Open center
Pump rated output Steering
15 L/min
4 gpm
Implement
20.2 L/min
5.3 gpm
35.2 L/min
9.3 gpm
Pump type Dual gear
Maximum operating pressure 172.4 bar
2500 psi
Draft control sensing Position control
Remote control valves available Up to two (optional)
3-point hitch:
Type Category 1
Lift capacity, 24-in. behind link arms 615.1 kg
1356 lb
Power take-off (PTO):
Standard 540 rpm at 2500 rpm
Control Independent
Clutch Wet disk
Brake (for mid and rear PTO) Wet disk
Fluid capacities:
Crankcase with filter 4.5 L
4.8 qt
Final drive:
Type Bull Gear
Operator station:
Rollover protective structure Type
Foldable
ASABE S478
Platform - flat/straddle Semi-flat
Gear shift location - console/floor Left-hand side
Dimensions:
Wheelbase 159.5 cm
62.8 in.
Front axle clearance 36.3 cm
14.3 in.
Turning radius without brakes 2.9 m
9.4 ft
Approximate shipping weight (open-station; cab) 1007.9 kg
2222 lb
Tires:
Front Farm - 7-14
Turf - 27x8.5-15
R4 - 25x8.5-14
R4 - 27x8.5-15
Rear Farm - 11.2-24
Turf - 41x14-20
R4 - 15-19.5
R4 - 43x16-20