John Deere 3033R Compact Utility Tractor

Studio image of 3033R Compact Utility Tractor

Building, mowing, digging, tilling - sunrise to sunset - it’s all in a day’s work. That’s why we made the new 3R Series Compact Utility Tractors premium in every aspect… and literally from the ground up.

  • AutoConnect™ deck compatible for deck attach/detach in seconds
  • Cab or Open Station configuration available
  • PowrReverser™ or E-hydro transmission with Twin Touch™ pedals
  • See Ways To Save
Key Specs:
Engine power (gross) 23.7 kW
32.2 hp
PS at 2600 rpm
SAE J1995 rated power
Power take-off (PTO) power PRT - 19.5 kW
26.1 hp
eHST - 17.2 kW
23 hp
Per SAE J1995
Steering hydraulics 23.5 L/min
6.2 gpm
Implement hydraulics 34.3 L/min
9.1 gpm
Hitch type Category 1
Lift capacity, 24-in. behind link arms 995 kg
2194 lb
Standard transmission; forward/reverse PowrReverser transmission (PRT)
Cruise control Standard
Approximate shipping weight (open-station; cab) Rollover protective structure (ROPS) - 1315.4 kg
2900 lb
Cab: 1619.3 kg
3570 lb
Wheelbase 172.7 cm
68 in.
Engine:
Family EYDXL1.64NDA
FYDXL1.64NDA
GYDXL1.64NDA
Manufacturer Yanmar
Engine model 3TNV88C-MJT
Engine power (gross) 23.7 kW
32.2 hp
PS at 2600 rpm
SAE J1995 rated power
Power take-off (PTO) power PRT - 19.5 kW
26.1 hp
eHST - 17.2 kW
24.3 hp
Per SAE J1995
Rated engine speed 2600 rpm
Type Diesel
Injection pump type High pressure common rail direct injection
Aspiration Natural
Emissions compliance Final Tier 4
Cylinders/displacement 3 / 1.64 L
3 / 100 cu in.
Number of cylinders Three
Cylinder liners Cast-in-block
Bore and stroke 88x90 mm
3.46x3.54 in.
Compression ratio 19.1:1
Lubrication Pressurized
Cooling system Liquid
Air cleaner Dual element
Engine torque at rated speed 87 Nm
64.2 lb-ft
Fuel tank capacity Rollover protective structure (ROPS): 37.4 L
10 U.S. gal.
Cab: 47.6 L
12.6 U.S. gal.
Electrical:
Battery size 500 CCA
Alternator (12-V) 75 amp
Starter size 1.4 kW
1.9 hp
Fuel system:
Type High pressure common rail direct injection
Fuel consumption
7.6 L/hr
2 U.S. gal.
Transmission:
Standard transmission; forward/reverse PowrReverser transmission (PRT)
Optional transmission; forward/reverse PRT only
Left-hand reverser eHydro transmission (eHST)
Transmission gear ranges 12F/12R PowrReverser (PRT)
3-range, infinitely variable
Final drive Bull Gear
Brakes Multi-plate wet disc
Steering Hydrostatic power steering
Clutch, wet/dry Wet disc
Axle capacity Front
1450 kg
3197 lb
Rear
1850 kg
4079 lb
Creeper SpeedMatch optional
Cruise control Standard
Differential lock Yes
Hydraulics:
Type Open center
Pump rated output Steering
23.5 L/min
6.2 gpm
Implement
34.3 L/min
9.1 gpm
57.8 L/min
15.3 gpm
Pump type Single gear
Maximum operating pressure 172.4 bar
2500 psi
Draft control sensing Position control
Remote control valves available Up to six rear remotes
3-point hitch:
Type Category 1
Lift capacity, 24-in. behind link arms 995 kg
2194 lb
Power take-off (PTO):
Standard Independent Rear - 540 rpm
Optional Mid - 2100 rpm
Control Position control
Clutch Wet disc
Brake (for mid and rear PTO) Wet disc
Fluid capacities:
Crankcase with filter 4.3 L
4.5 qt
Transmission and hydraulic system 24.6 L
6.5 U.S. gal.
Final drive:
Type Bull Gear
Operator station:
Rollover protective structure Type
Foldable
Yes
Platform - flat/straddle Flat
Gear shift location - console/floor PRT - Left-hand side
Cab:
Compliance Complies with OSHA, SAE, and CSA standards for roll-over protection
Visibility 360 degree (angle)
Doors Two
Noise rating 80 dBA
Seat equipment Scissor-link
Dimensions:
Wheelbase 172.7 cm
68 in.
Front axle clearance 30 cm
11.8 in.
Turning radius with brakes 2.7 m
8.8 ft
Turning radius without brakes 2.8 m
9.2
Approximate shipping weight (open-station; cab) ROPS: 1315.4 kg
2900 lb
Cab: 1619.3 kg
3570 lb
Tires:
Front Farm - 7-14
Turf - 27x8.50-15
Turf Special - 25/10.5LLx15
Industrial - 25x8.5-14 or 27x8.5-15
Rear Farm - 11.2-24
Turf - 41x14-20
Turf Special - 41x18LL-16.1
Industrial - 15-19.5 or 43x16-20
Front tread range 114 cm
44.9 in.
Rear tread spacing 103.1 cm
40.6 in.
Video: 
1369LV