John Deere 3046R Compact Utility Tractor

Studio image of 3046r Compact Utility Tractor

Building, mowing, digging, tilling - sunrise to sunset - it’s all in a day’s work. That’s why we made the new 3R Series Compact Utility Tractors premium in every aspect… and literally from the ground up.

  • Powerful and reliable Yanmar Diesel Engine
  • AutoConnect™ deck compatible for deck attach/detach in seconds
  • Cab or Open Station configuration available
  • Standard hydrostatic transmission with Twin Touch™ pedals
Key Specs:
Engine power (gross) 33.3 kW
45.3 hp
PS at 2600 rpm
SAE J1995 rated power
Power take-off (PTO) power 25.2 kW
33.9 hp
Per SAE J1995
Steering hydraulics 23.5 L/min
6.2 gpm
Implement hydraulics 34.3 L/min
9.1 gpm
Hitch type Category 1
Lift capacity, 24-in. behind link arms 995 kg
2194 lb
Standard transmission; forward/reverse eHydro transmission (eHST)
Cruise control Standard
Approximate shipping weight (open-station; cab) Rollover protective structure (ROPS) - 1315.4 kg
2900 lb
Cab - 1619.3 kg
3570 lb
Wheelbase 172.7 cm
68 in.
Engine:
Family EYDXL1.57HDA
FYDXL1.57HDA
GYDXL1.57HDA
Manufacturer Yanmar
Engine model 3TNV86CHT-MJT
Engine power (gross) 33.3 kW
45.3 hp
PS at 2600 rpm
SAE J1995 rated power
Power take-off (PTO) power 25.2 kW
33.9 hp
Per SAE J1995
Rated engine speed 2600 rpm
Type Diesel
Injection pump type High pressure common rail direct injection
Aspiration Turbocharged and charge air cooled
Emissions compliance Final Tier 4
Cylinders/displacement 3 / 1.57 L
3 / 95.7 cu in.
Number of cylinders Three
Cylinder liners Cast-in-block
Bore and stroke 86 x 90 mm
3.4 x 3.54 in.
Compression ratio 19.1:1
Lubrication Pressurized
Cooling system Liquid
Air cleaner Dual element
Engine torque at rated speed 112 Nm
90 lb-ft
Fuel tank capacity Rollover protective structure (ROPS): 37.4 L
10 U.S. gal.
Cab: 47.6 L
12.6 U.S. gal.
Electrical:
Battery size 500 CCA
Alternator (12-V) 75 amp
Starter size 1.4 kW
1.9 hp
Fuel system:
Type High pressure common rail direct injection
Fuel consumption
10.6 L/hr
2.8 gph
Transmission:
Standard transmission; forward/reverse eHydro transmission (eHST)
Left-hand reverser No
Transmission gear ranges 12F/12R PowrReverser
3-range, infinitely variable
Final drive Bull Gear
Brakes Multi-plate wet disc
Steering Hydrostatic power steering
Axle capacity Front
1450 kg
3197 lb
Rear
1850 kg
4079 lb
Creeper SpeedMatch standard
Cruise control Standard
Hydraulics:
Type Open center
Pump rated output Steering
23.5 L/min
6.2 gpm
Implement
34.3 L/min
9.1 gpm
57.8 L/min
15.3 gpm
Pump type Single gear
Maximum operating pressure 172.4 bar
2500 psi
Draft control sensing Position control
Remote control valves available Up to six rear remotes
3-point hitch:
Type Category 1
Lift capacity, 24-in. behind link arms 995 kg
2194 lb
Power take-off (PTO):
Standard Independent Rear - 540 rpm
Optional Mid - 2100 rpm
Control Position control
Clutch Wet disc
Brake (for mid and rear PTO) Wet disc
Fluid capacities:
Crankcase with filter 5.7 L
6 qt
Transmission and hydraulic system 26.5 L
7 U.S. gal.
Final drive:
Type Bull Gear
Operator station:
Rollover protective structure Type
Foldable
Yes
Platform - flat/straddle Flat
Gear shift location - console/floor PRT - Left-hand side
Cab:
Compliance Complies with OSHA, SAE, and CSA standards for roll-over protection
Visibility 360 degree (angle)
Doors Two
Noise rating 80 dBA
Seat equipment Scissor-link
Dimensions:
Wheelbase 172.7 cm
68 in.
Front axle clearance 30 cm
11.8 in.
Turning radius with brakes 2.7 m
8.8 ft
Turning radius without brakes 2.8 m
9.2 ft
Approximate shipping weight (open-station; cab) ROPS - 1315.4 kg
2900 lb
Cab - 1619.3 kg
3570 lb
Tires:
Front Farm - 7-14
Turf - 27x8.50-15
Turf Special - 25/10.5LLx15
Industrial - 25x8.5-14 or 27x8.5-15
Rear Farm - 11.2-24
Turf - 41x14-20
Turf Special - 41x18LL-16.1
Industrial - 15-19.5 or 43x16-20
Front tread range 114 cm
44.9 in.
Rear tread spacing 103.1 cm
40.6 in.