The L331 Large Square Baler is built for more capacity, more efficiency, and more accuracy.
- Bale Documentation with John Deere Operations Center™
- MegaWide™ pickup with MegaTough™ pickup teeth
- John Deere moisture sensor and weighing system
- BalerAssist™ drivetrain system
Call Us
- Anna, Ohio937-693-2221
- Franklin, Indiana317-738-2250
- Greenfield, Indiana317-462-5585
- Greensburg, Indiana812-663-5992
- Greenville, Ohio937-548-1151
- Oxford, Ohio513-523-4169
- Richmond, Indiana765-962-7330
- Rushville, Indiana765-932-2977
- Urbana, Ohio937-653-5281
Manufacturer
John Deere
Category
Balers
Location
Anna, Ohio
Franklin, Indiana
Greenfield, Indiana
Greensburg, Indiana
Greenville, Ohio
Oxford, Ohio
Richmond, Indiana
Rushville, Indiana
Urbana, Ohio
Specs
| Key Specs: | |
|---|---|
| Bale | 80x90 cm 3x3 ft |
| Width | 80 cm 32 in. |
| Height | 90 cm 35 |
| Length | 60 up to 300 cm 24 up to 118 in. |
| Number of knotters | Four |
| Knives | 11, 7, or 6 |
| Machine - Width | 2.76 m 9.1 ft |
| Machine - Height | 2.7 m 8.9 ft |
| Machine - Weight | 7,700 kg 16,975 lb |
| Minimum tractor requirement | 86 kW 115 PTO hp - no Pre-Cutter 97 kW 130 PTO hp - with Pre-Cutter |
| Bale dimensions: | |
| Bale | 90x90 cm 3x3 ft |
| Width | 80 cm 32 in. |
| Height | 90 cm 35 in. |
| Length | 60 up to 300 cm 24 up to 118 in. |
| Pickup: | |
| Intake width | 220 cm 86 in. |
| Pickup diameter | 25.6 cm 10 in. |
| Number of tine bars 4-5 | Four |
| Tine spacing | 6.6 cm 2.6 in. |
| Pre-compression roller baffle | |
| Pickup fixed gauge wheels | |
| Pickup caster gauge wheels - pivoting | |
| Pickup floating | |
| Pickup protection | |
| Bale chamber: | |
| Number of plunger strokes | 45 spm |
| Plunger stroke | 69.5 cm 27 in. |
| Plunger roller size | |
| Density control | Three hydraulic cylinders |
| Number of hydraulic cylinders | |
| Bale chamber length | 305 cm 120 in. |
| Control | ISOBUS - GreenStar™ 2 1800 or GreenStar 3 2630 |
| Knotting system: | |
| Number of knotters | Four |
| Cleaning system | |
| Knotter tracking system | |
| Twine capacity (rolls) | 30 |
| Intake system: | |
| High-capacity rotor | Yes |
| Knives | 11, 7, or 6 |
| Cutting length | 44 mm 1.7 in. or 88 mm 3.5 in. |
| Knife protection | Individual spring |
| Knife cleaning system | |
| Slide out floor | Yes |
| Driven crop roll (opt) | |
| Wheels and axles: | |
| Single axle | 600/50/22.5 or 710/40R/22.5 |
| Tandem axle steered (optional) | 500/55/20 or 550/45/22.5 |
| Brakes system | Optional hydraulic |
| Machine dimensions: | |
| Length | 7.8 m 25.6 ft |
| Width | 2.76 m 9.1 ft |
| Height | 2.7 m 8.9 ft |
| Weight | 7,700 kg 16,975 lb |
| Minimum tractor requirement | 86 kW 115 PTO hp - no Pre-Cutter 97 kW 130 PTO hp - with Pre-Cutter |
| Additional information: | |
| Weighing device (opt) | |
| Greasing system | |
| Large square baler connection | |
| Large square baler control | |
| Storage box | |
| Humidity sensor (opt) | |
| Date collected |