Q800 QuikTrak™ R Series mowers are redesigned for operator stability and comfort. These stand-on mowers feature higher horsepower engines, including an Electronic Fuel Injected (EFI) option, and best-in-class 7Iron™ PRO mower decks. They are highly productive and easy to operate and maintain.
- 34.5-hp (25.7-kW) EFI engine
- 60-in. and 72-in. 7Iron™ PRO decks, 60-in. FastBack™ PRO deck
- Mow up to 12 mph
- Warranty: 36 months or 1500 hours, which ever comes first; First 24 months, no hour limitation**
Call Us
- Amelia, Ohio513-797-4500
- Bloomington, Indiana812-336-4133
- Botkins, Ohio937-693-2201
- Franklin, Indiana317-738-2250
- Germantown, Ohio937-855-6536
- Greenfield, Indiana317-462-5585
- Greensburg, Indiana812-663-5992
- Greenville, Ohio937-548-1151
- Lebanon, Ohio513-932-3961
- Oxford, Ohio513-523-4169
- Richmond, Indiana765-962-7330
- Rushville, Indiana765-932-2977
- Tipp City, Ohio937-877-1920
- Urbana, Ohio937-653-5281
Buy Online
Manufacturer
John Deere
Category
Stand On Mowers
Location
Amelia, Ohio
Bloomington, Indiana
Botkins, Ohio
Franklin, Indiana
Germantown, Ohio
Greenfield, Indiana
Greensburg, Indiana
Greenville, Ohio
Lebanon, Ohio
Oxford, Ohio
Richmond, Indiana
Rushville, Indiana
Tipp City, Ohio
Urbana, Ohio
Specs
Key Specs: | |
---|---|
Engine Manufacturer/model | FX820V EFI |
Engine power | Gross at 3,600 rpm: 34.5 hp 25.7 kW |
Fuel tank capacity | 12 U.S. gal. 45.3 L |
Mower deck size | 60-in. (152-cm) 7Iron™ PRO side-discharge |
Blade tip speed | Approximately 18,000 fpm 5486 m/min |
Transmission | Tuff Torq TZT13 IHT |
Speed range | 0-12 mph 0-19.3 km/h |
Drive wheels | 24x12-12 pneumatic 24x12N12 Tweel |
Caster wheels | 13x5-6 |
Warranty | 36 months or 1500 hours, whichever comes first. First 24 months, no hour limitation. |
Engine: | |
Manufacturer/Model | FX820V EFI |
Power | Gross at 3,600 rpm: 34.5 hp 25.7 kW |
Displacement | 50.2 cu in. 822 cc |
Injection | |
Cylinders | Two, V-twin |
Crankcase capacity | With filter, 2.2 qt 2.1 L |
Oil filter | Full flow, replaceable |
Lubrication | Full pressure |
Cooling | Forced air, with integrated clean out ports and oil cooler |
Air cleaner | Heavy-duty canister type with safety element |
Fuel system: | |
Fuel type | Gasoline |
Fuel consumption | |
Fuel tank capacity | 12 U.S. gal. 45.3 L |
Fuel tank switch/shut-off valve | No |
Electrical system: | |
Charge system | At 3,600 rpm 30A |
Battery voltage | 12 V |
Cold cranking amp | 300 CCA |
Hour meter | Display panel including hour meter, fuel level, engine speed, system voltage, low engine oil pressure indicator, starting interlock indicators (PTO, operator presence, park brake), caution warning, stop warning, and on-board diagnostics |
Operator presence starting system | Yes |
Drivetrain: | |
Transmission | Tuff Torq TZT13 IHT |
Hydraulic pumps | 0.79 cu in. 13 cc |
Wheel motors | 13 cu in. 213 cc |
Travel speed | Speed range 0-12 mph 0-19.3 km/h Forward Infinite, 0-12 mph Infinite, 0-19.3 km/h Reverse Infinite, 0-6 mph Infinite, 0-9.7 km/h |
Speed and direction control | Twin hand-controlled levers |
Hydraulic capacity | 6.0 U.S qt 5.7 L |
Hydraulic oil cooler | Two 8.5 in. (22 cm) fans |
Filter | Two internal and replaceable |
Buyer's note: | |
Warranty | 36 months or 1500 hours, whichever comes first. First 24 months, no hour limitation. |
Tires: | |
Drive wheels | 24x12-12 pneumatic 24x12N12 Tweel |
Rear tires | |
Load rating | 4 PR |
Brakes: | |
Dynamic braking | Dual hand-controlled levers |
Park brake | Internal wet disk |
Park brake actuation | Hand lever |
PTO: | |
Type | Electro-magnetic with brake, 225 lb-ft 305 Nm |
Drive | V-belt |
Mower decks: | |
Size | 60-in. (152-cm) 7Iron™ PRO side-discharge |
Deck construction | 7-Iron™ PRO: one-piece forged steel |
Deck thickness | 7 gauge 0.180 in. 4.6 mm |
Discharge | Side |
Height-of-cut range | Increments 0.25 in. 0.64 cm 1.5-5 in. 3.8-12.7 cm |
Cutting width | 60-in. (152-cm) 7Iron™ PRO side-discharge |
Blades: | |
Length | |
Thickness | 0.25 in. 0.64 cm |
Blade tip speed | Approximately 18,000 fpm 5486 m/min |
Number | Three |
Wheels: | |
Caster wheel type | Flat free |
Caster wheels | 13x5-6 |
Front anti-scalp rollers | RH, center, LH |
Rear anti-scalp rollers | |
Dimensions: | |
Length | Foot platform up, 70 in. 183 cm Foot platform down, 74.75 in. 190 cm |
Width | With chute down, 74 in. 188 cm |
Height | 49 in. 124 cm |
Weight | 1165 lb 528 kg |
Operation: | |
Rollover protective structure (ROPS) | |
Slope operating limit | |
Additional information: | |
Date collected | 28-Aug-2023 |